MV AGUSTA RIVALE 800 12->20 92kW

Centralita ELDOR NEMO 2.0 · 125 CV (92 kW) · 800 cc · Benzina aspirato

Base de datos de centralitasMV AGUSTA › MV AGUSTA RIVALE 800 12->20 92kW

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 14 versiones de firmware

Datos del vehículo

MarcaMV AGUSTA
ModeloRIVALE 800
Motor12->20 92kW
Potencia de serie125 CV / 92 kW
Cilindrada800 cc
CombustibleBenzina aspirato
Tipo de vehículoMoto

Centralita

FabricanteELDOR
ModeloNEMO 2.0
Memoria / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Operaciones / opciones de tuning disponibles:

  • Correction de avance cilindro 2
  • Gestión principal del avance
  • Lambda/AFR a carga parcial
  • Avance optimal
  • Corrección avance de la chispa para el sensor ECT
  • Cálculo de carga motor deseada
  • Corrección Lambda
  • Correction Lambda 2
  • Limitador de revoluciones
  • Limitador de revoluciones 2
  • Lambda pedida
  • Limitador de velocidad
  • Flujo de masa de aire
  • Par pedido
  • Par pedido - MT
  • Par pedida en mapa set 2
  • Par pedida en mapa set 3
  • Gestion ángulo mariposa

Identificadores de firmware (14)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
M3M34R-0509 1.00.0030509RE28 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RA32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RA43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RB32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RB43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RC32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RC43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RE32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RE43 ELDOR NEMO 2.0
M3M34R-0509 1.00.0080509R028 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RG32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RG43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0050516R032 ELDOR NEMO 2.0
M3M34R-0516 1.00.0080516R043 ELDOR NEMO 2.0

Notas técnicas del vehículo

OBD colocado debajo de la silla

Notas de la centralita

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.