MV AGUSTA DRAGSTER 800 14->20 92kW

Centralita ELDOR NEMO 2.0 · 125 CV (92 kW) · 800 cc · Benzina aspirato

Base de datos de centralitasMV AGUSTA › MV AGUSTA DRAGSTER 800 14->20 92kW

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 12 versiones de firmware

Datos del vehículo

MarcaMV AGUSTA
ModeloDRAGSTER 800
Motor14->20 92kW
Potencia de serie125 CV / 92 kW
Cilindrada800 cc
CombustibleBenzina aspirato
Tipo de vehículoMoto

Centralita

FabricanteELDOR
ModeloNEMO 2.0
Memoria / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Operaciones / opciones de tuning disponibles:

  • Correction de avance cilindro 2
  • Gestión principal del avance
  • Lambda/AFR a carga parcial
  • Avance optimal
  • Corrección avance de la chispa para el sensor ECT
  • Cálculo de carga motor deseada
  • Corrección Lambda
  • Correction Lambda 2
  • Limitador de revoluciones
  • Limitador de revoluciones 2
  • Lambda pedida
  • Limitador de velocidad
  • Flujo de masa de aire
  • Par pedido
  • Par pedido - MT
  • Par pedida en mapa set 2
  • Par pedida en mapa set 3
  • Gestion ángulo mariposa

Identificadores de firmware (12)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
M3M34R-0516 1.00.0040516D011 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DA11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DA23 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DB11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DC11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DC23 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DE11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DE23 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DG11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DG23 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DW11 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516DW23 ELDOR NEMO 2.0

Notas técnicas del vehículo

OBD colocado debajo de la silla

Notas de la centralita

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.