MERCEDES TRUCK VARIO W670 813 D 4.3L L4 95kW/127HP TEMIC

Centralita TEMIC TEMIC PLD · 129 CV (95 kW) · 4300 cc · Diesel sovralimentato

Base de datos de centralitasMERCEDES TRUCK › MERCEDES TRUCK VARIO W670 813 D 4.3L L4 95kW/127HP TEMIC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 13 versiones de firmware

Datos del vehículo

MarcaMERCEDES TRUCK
ModeloVARIO W670
Motor813 D 4.3L L4 95kW/127HP TEMIC
Potencia de serie129 CV / 95 kW
Cilindrada4300 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteTEMIC
ModeloTEMIC PLD
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Flujo máximo de masa de aire a través del compresor
  • Limitador de presión de turbo
  • Protección contra sobrecalentamiento del motor
  • Protección contra sobrecalentamiento del motor 2
  • Protección contra sobrecalentamiento del motor 3
  • Gestión básica de par al arranque del motor
  • Ralentì del motor para el sensor ECT
  • Ángulo de inyección
  • Ángulo de inyección 2
  • Ángulo de inyección - corrección
  • Ángulo de emntrega inyección
  • Limitador de gases
  • Par máximo indicado
  • Perfil de par máximo

Identificadores de firmware (13)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
05A 1.54.005 TEMIC TEMIC PLD
B50 1.54.117 TEMIC TEMIC PLD
B50 1.54.116 TEMIC TEMIC PLD
07B 1.54.014 TEMIC TEMIC PLD
J51 1.54.016 TEMIC TEMIC PLD
E51 1.54.018 TEMIC TEMIC PLD
53G 1.54.012 TEMIC TEMIC PLD
09D 1.54.007 TEMIC TEMIC PLD
07B 1.54.006 TEMIC TEMIC PLD
56E 1.54.123 TEMIC TEMIC PLD
06A 1.54.022 TEMIC TEMIC PLD
J51 1.54.133 TEMIC TEMIC PLD
09D 1.54.015 TEMIC TEMIC PLD

Notas de la centralita

Original EPROM PSOP 44 pins 29F200BB. This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.