MERCEDES TRUCK ACTROS 2648 12L V6 350kW/469HP TEMIC

Centralita TEMIC TEMIC PLD · 476 CV (35 kW) · 12000 cc · Diesel sovralimentato

Base de datos de centralitasMERCEDES TRUCK › MERCEDES TRUCK ACTROS 2648 12L V6 350kW/469HP TEMIC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 4 versiones de firmware

Datos del vehículo

MarcaMERCEDES TRUCK
ModeloACTROS
Motor2648 12L V6 350kW/469HP TEMIC
Potencia de serie476 CV / 35 kW
Cilindrada12000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteTEMIC
ModeloTEMIC PLD
Memoria / EPROMMICRO INIFINEON XC2288 - 12800 Kbit - 200000 . la memoria contiene sia la FLASH che RESEVED FLASH

Operaciones / opciones de tuning disponibles:

  • Flujo máximo de masa de aire a través del compresor
  • Limitador de presión de turbo
  • Protección contra sobrecalentamiento del motor
  • Protección contra sobrecalentamiento del motor 2
  • Protección contra sobrecalentamiento del motor 3
  • Gestión básica de par al arranque del motor
  • Ralentì del motor para el sensor ECT
  • Ángulo de inyección
  • Ángulo de inyección 2
  • Ángulo de inyección - corrección
  • Ángulo de emntrega inyección
  • Limitador de gases
  • Par máximo indicado
  • Perfil de par máximo

Identificadores de firmware (4)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
31B 1.54.002 TEMIC TEMIC PLD
07B 1.54.013 TEMIC TEMIC PLD
11C 1.54.012 TEMIC TEMIC PLD
23E 1.54.005 TEMIC TEMIC PLD

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
This Setting File can be used for serial system NewGenius.