MERCEDES TRUCK ACTROS 1844 12L V6 320kW/429HP TEMIC

Centralita TEMIC TEMIC PLD · 435 CV (32 kW) · 12000 cc · Diesel sovralimentato

Base de datos de centralitasMERCEDES TRUCK › MERCEDES TRUCK ACTROS 1844 12L V6 320kW/429HP TEMIC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 9 versiones de firmware

Datos del vehículo

MarcaMERCEDES TRUCK
ModeloACTROS
Motor1844 12L V6 320kW/429HP TEMIC
Potencia de serie435 CV / 32 kW
Cilindrada12000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteTEMIC
ModeloTEMIC PLD
Memoria / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Operaciones / opciones de tuning disponibles:

  • Flujo máximo de masa de aire a través del compresor
  • Limitador de presión de turbo
  • Protección contra sobrecalentamiento del motor
  • Protección contra sobrecalentamiento del motor 2
  • Gestión básica de par al arranque del motor
  • Ralentì del motor para el sensor ECT
  • Ángulo de inyección
  • Ángulo de inyección 2
  • Ángulo de inyección - corrección
  • Ángulo de emntrega inyección
  • Limitador de gases
  • Par máximo indicado
  • Perfil de par máximo

Identificadores de firmware (9)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
G51 1.54.019 TEMIC TEMIC PLD
60A 1.54.012 TEMIC TEMIC PLD
11C 1.54.008 TEMIC TEMIC PLD
56E 1.54.017 TEMIC TEMIC PLD
V49 1.54.121 TEMIC TEMIC PLD
B50 1.54.127 TEMIC TEMIC PLD
E51 1.54.014 TEMIC TEMIC PLD
53H 1.54.015 TEMIC TEMIC PLD
W49 1.54.125 TEMIC TEMIC PLD

Notas de la centralita

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.