AUDI A6 (C4/4A) 1.8L 16V TURBO 120KW/161HP ME7.5
Centralita BOSCH ME7.5 · 163 CV (12 kW) · 1800 cc · Benzina sovralimentato
Base de datos de centralitas ›
AUDI › AUDI A6 (C4/4A) 1.8L 16V TURBO 120KW/161HP ME7.5
Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.
✓ Tuning por archivo (flash)
2 versiones de firmware
Obtén el archivo para este vehículo
Datos del vehículo
| Marca | AUDI |
| Modelo | A6 (C4/4A) |
| Motor | 1.8L 16V TURBO 120KW/161HP ME7.5 |
| Potencia de serie | 163 CV / 12 kW |
| Cilindrada | 1800 cc |
| Combustible | Benzina sovralimentato |
| Tipo de vehículo | Auto |
Centralita
| Fabricante | BOSCH |
| Modelo | ME7.5 |
| Memoria / EPROM | 29F800 PSOP44 8Mbit - Flash 512K x 16 |
Operaciones / opciones de tuning disponibles:
- Avance a carga parcial
- Limitador presión de turbo para diagnósticos
- Limitador de presión de turbo
- Limitador de presión de turbo 2
- Limitador de presión de turbo 3
- Limitador de presión de turbo 4
- Limitador de presion de turbo 5
- Referencia de carga acelerador / posición mariposa
- Inyección a carga parcial
- Limitador de avance
- Limitador de carga
- Enriquecimiento Lambda para la protección de los componentes
- Limitador sensor de picado
- P
- Gestión presión de turbo maxima
- Referencia de carga acelerador / posición mariposa - AT
- Flujo de masa de aire
Identificadores de firmware (2)
| N.º Hardware | N.º Software (chip) | Versión | Software de actualización | Centralita |
|---|---|---|---|---|
| 0261206917 | 1037354806 | 1.21.006 | 4B0906018CA 0003 | BOSCH ME7.5 |
| 0261207635 | 1037363038 | 1.42.008 | 4B0906018DB 0002 | BOSCH ME7.5 |
Notas de la centralita
Original EPROM PSOP 44 pins 29F800BB. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Obtén el archivo para este vehículo
Herramientas para leer y escribir esta centralita
Otros AUDI
100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP