VOLVO S80 Mk1 2.8L T6 BITURBO 202kW/275HP ME7.0

ECU BOSCH ME7.0 · 275 CV (202 kW) · 2800 cc · Benzina sovralimentato

ECU DatabaseVOLVO › VOLVO S80 Mk1 2.8L T6 BITURBO 202kW/275HP ME7.0

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandVOLVO
ModelS80 Mk1
Engine2.8L T6 BITURBO 202kW/275HP ME7.0
Stock power275 CV / 202 kW
Displacement2800 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.0
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Constant pressure control
  • Max boost pressure control
  • Air mass flow

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612045591037359462 1.46.00900KPSC.a2l BOSCH ME7.0
02612045591037359462 1.46.03300n0MHde.a2l BOSCH ME7.0
02612045591037359462 1.46.0110ENFP.a2l BOSCH ME7.0
02612045591037359462 1.46.0270xEKMH.a2l BOSCH ME7.0
02612045591037359462 1.46.00600EVHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.0140010mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.00820ERHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.00600EUHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.00800U1HJ.a2l BOSCH ME7.0
02612068291037359462 1.46.02600epfp.a2l BOSCH ME7.0

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!