VOLVO S80 Mk1 2.4L 20V TURBO 147kW/197HP ME7.0

ECU BOSCH ME7.0 · 200 CV (147 kW) · 2400 cc · Benzina sovralimentato

ECU DatabaseVOLVO › VOLVO S80 Mk1 2.4L 20V TURBO 147kW/197HP ME7.0

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandVOLVO
ModelS80 Mk1
Engine2.4L 20V TURBO 147kW/197HP ME7.0
Stock power200 CV / 147 kW
Displacement2400 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.0
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter 3
  • Boost pressure limit control
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Boost pressure linearization
  • Lambda driver wish
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Optimal engine moment
  • Power limit torque table
  • Driver torque request
  • Driver torque request 2
  • Throttle angle management
  • Variable intake pulsation correction

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612045591037359462 1.46.00720KTHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.00620FMFP.a2l BOSCH ME7.0

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!