VOLKSWAGEN TOUAREG (7L) 4.2L V8 228kW/306HP ME7

ECU BOSCH ME7.1.1 · 310 CV (228 kW) · 4200 cc · Benzina aspirato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN TOUAREG (7L) 4.2L V8 228kW/306HP ME7

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 11 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelTOUAREG (7L)
Engine4.2L V8 228kW/306HP ME7
Stock power310 CV / 228 kW
Displacement4200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612080071037367525 1.42.0154D0907560BQ 0050 BOSCH ME7.1.1
02612080071037369021 1.42.0094D0907560BQ 0070 BOSCH ME7.1.1
02612080091037369030 1.42.0064D0907560BR 0020 BOSCH ME7.1.1
02612080091037367701 1.42.0044D0907560BR 0010 BOSCH ME7.1.1
02612080091037378164 1.42.0084D0907560BR 0030 BOSCH ME7.1.1
02612080091037381243 1.42.0044D0907560BR 0040 BOSCH ME7.1.1
02612083481037368034 1.42.0094D0907560DA 0020 BOSCH ME7.1.1
02612083481037374360 1.42.0044D0907560DA 0050 BOSCH ME7.1.1
02612085451037370941 1.42.0054D0907560DB 0010 BOSCH ME7.1.1
02612085451037371756 1.42.0134D0907560DB 0020 BOSCH ME7.1.1
02612089521037377002 1.42.0084D0907560DF 0020 BOSCH ME7.1.1

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata