VOLKSWAGEN TIGUAN Mk2 2.0L 16V TDI 140kW/188HP DSG DQ500 MQB

ECU TEMIC DQ500 MQB · 190 CV (14 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN TIGUAN Mk2 2.0L 16V TDI 140kW/188HP DSG DQ500 MQB

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelTIGUAN Mk2
Engine2.0L 16V TDI 140kW/188HP DSG DQ500 MQB
Stock power190 CV / 14 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerTEMIC
ModelDQ500 MQB
Memory / EPROMMicro Renesas - 20480 Kbit

Available tuning operations / options:

  • Maximum time for gear downshift
  • Time shift
  • Time shift with torque reduction
  • Time shift with torque reduction 2
  • Engagement time for gear overlap
  • Maximum torque limitation at clutch
  • Clutch torque reduction factor
  • Gearbox torque limiter
  • Gearbox torque limiter 2
  • Maximum torque reduction in ECO (D)
  • Maximum torque reduction during launch control
  • Maximum torque reduction in MANUAL
  • Maximum torque reduction in SPORT (S)
  • RPM limiter
  • RPM limiter - N
  • Maximum torque allowed for gear upshift
  • Gearbox torque limiter for ECT sensor
  • Engine torque limiter depending on vehicle speed
  • Maximum allowable oil pressure
  • Maximum oil pressure allowed at the clutch
  • Maximum upshifting time for 2 gears
  • Maximum upshifting time for 3 gears
  • Maximum upshifting time for 4 gears
  • Maximum upshifting time for 5 gears
  • Oil pressure during adaptations
  • Oil pressure correction based on TOT
  • Gear based pressure verification
  • Shift time with torque reduction
  • Shift timing for gear downshift without load

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0DL300011N 1.94.0020DL300011N 2002 TEMIC DQ500 MQB
0DL300011N 1.94.0030DL300011N 2001 TEMIC DQ500 MQB

ECU notes

Microprocessor SH72549 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata