VOLKSWAGEN SCIROCCO 3 1.4L 16V TSI 90kW/121HP MED17.5

ECU BOSCH MED17.5 · 122 CV (9 kW) · 1400 cc · Benzina sovralimentato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN SCIROCCO 3 1.4L 16V TSI 90kW/121HP MED17.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 21 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelSCIROCCO 3
Engine1.4L 16V TSI 90kW/121HP MED17.5
Stock power122 CV / 9 kW
Displacement1400 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED17.5
Memory / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Exhaust gas temperature
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High fuel pressure pump limit
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum intake manifold pressure
  • Max torque profile
  • Optimal engine moment
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Throttle angle management

Firmware identifiers (21)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.94.03503C906016AH 5717 BOSCH MED17.5
1.94.01703C906016 3546 BOSCH MED17.5
1.94.02103C906016 5049 BOSCH MED17.5
1.94.02703C906027BA 5448 BOSCH MED17.5
1.94.03303C906016B 2204 BOSCH MED17.5
1.94.01103C906027AT 5447 BOSCH MED17.5
0261S043961037399087 1.94.02103C906022AQ 3641 BOSCH MED17.5.20
1.94.02103C906016BS 4772 BOSCH MED17.5.5
1.94.01703C906016BM 9970 BOSCH MED17.5.5
1.94.00303C906016BA 8009 BOSCH MED17.5.5
1.94.01303C906016BB 9066 BOSCH MED17.5.5
1.94.04303C906016AA 5887 BOSCH MED17.5.5
1.94.00803C906016HN 7127 BOSCH MED17.5.5
1.94.02303C906016AA 7356 BOSCH MED17.5.5
1.94.02503C906016DF 1989 BOSCH MED17.5.5
1.94.01603C906016CN 2399 BOSCH MED17.5.5
1.94.01403C906016BA 9065 BOSCH MED17.5.5
1.94.00503C906016BS 3719 BOSCH MED17.5.5
1.94.01503C906027BB 5861 BOSCH MED17.5.5
1.94.02003C906016BB 8008 BOSCH MED17.5.5
1.94.01703C906016AA 9090 BOSCH MED17.5.5

ECU notes

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata