VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

ECU BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina sovralimentato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelJETTA 5 (A5)
Engine2.5L 20V 125kW/168HP ME7.1.1
Stock power170 CV / 125 kW
Displacement2500 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Injection at part load
  • Speed / RPM limiter
  • Lambda enrichment for components protection
  • RPM Limiter 2
  • RPM limiter 3
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Driver torque request
  • Throttle angle management

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612011271037393225 1.84.00407K906032Q 9934 BOSCH ME7.1.1
02612015041037383980 1.42.00307K906032BC 0603 BOSCH ME7.1.1
02612016791037390701 1.84.00307K906032BM 0711 BOSCH ME7.1.1

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata