Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 6 firmware versions
Vehicle data
| Brand | VOLKSWAGEN |
| Model | JETTA 5 (A5) |
| Engine | 1.9L 8V TDI 77kW/104HP EDC16U31 |
| Stock power | 105 CV / 77 kW |
| Displacement | 1900 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16U31/U34/CP34 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Smoke limiter 2
- Main injection duration angle
- Main injection duration angle 4
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- EGR valve control in aftertreatment modes 3
- EGR valve control in aftertreatment modes 4
- EGR valve control in aftertreatment modes 5
- EGR valve control in aftertreatment modes 6
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request AWD
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS 2
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
Firmware identifiers (6)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 1037380437 |
1.67.023 | 03G906021KH 8984 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037392983 |
1.67.019 | 03G906021PK 2245 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037376708 |
1.67.023 | 03G906016AB 7550 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037513681 |
1.67.019 | 038997016R 0282 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037379847 |
1.67.017 | 03G906021GP 8824 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037376707 |
1.67.015 | 03G906016AC 7551 |
BOSCH EDC16U31/U34/CP34 |
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Get the file for this vehicle
Tools to read and write this ECU
