VOLKSWAGEN JETTA 4 (A4) 2.0L 8V 85kW/113HP ME7.5

ECU BOSCH ME7.5 · 115 CV (85 kW) · 2000 cc · Benzina aspirato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN JETTA 4 (A4) 2.0L 8V 85kW/113HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 16 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelJETTA 4 (A4)
Engine2.0L 8V 85kW/113HP ME7.5
Stock power115 CV / 85 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware identifiers (16)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612012741037378927 1.21.00906A906012A 0502 BOSCH ME7.5
02612013731037380561 1.42.01106G906032F 0604 BOSCH ME7.5
02612069091037360123 1.21.00806A906032BQ 3657 BOSCH ME7.5
02612069091037360926 1.21.01106A906032BQ 3889 BOSCH ME7.5
02612069631037360928 1.21.00806A906032BS 3891 BOSCH ME7.5
02612073571037362575 1.21.00306A906032FP 4072 BOSCH ME7.5
02612073671037362568 1.21.00906A906032FR 4070 BOSCH ME7.5
02612076191037363067 1.21.00906A906032JK BOSCH ME7.5
02612076191037363612 1.21.01206A906032JK 0102 BOSCH ME7.5
02612076201037363613 1.21.01106A906032JJ BOSCH ME7.5
02612076201037363065 1.21.01206A906032JJ BOSCH ME7.5
02612079241037366163 1.21.01006A906032MC 4622 BOSCH ME7.5
02612079251037366164 1.21.00806A906032MD 4623 BOSCH ME7.5
02612081251037368684 1.21.01006A906032NF 0302 BOSCH ME7.5
02612081261037368688 1.21.00806A906032NG 0302 BOSCH ME7.5
02612085621037371720 1.42.00906A906032RH 6374 BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.