English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

VOLKSWAGEN GOLF 4 (A4) 1.8L 20V 92kW/123HP ME7.5

ECU BOSCH ME7.5 · 125 CV (92 kW) · 1800 cc · Benzina aspirato

ECU Database › VOLKSWAGEN › VOLKSWAGEN GOLF 4 (A4) 1.8L 20V 92kW/123HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandVOLKSWAGEN
ModelGOLF 4 (A4)
Engine1.8L 20V 92kW/123HP ME7.5
Stock power125 CV / 92 kW
Displacement1800 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow
  • Driver torque request

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612081201037366421 1.21.01206A906032MM 0001 BOSCH ME7.5
02612081211037366422 1.21.01006A906032NR 0001 BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other VOLKSWAGEN

GOLF 3 (A3)
2.8L VR6 128kW/172HP MOTRONIC GOLF 3 (A3)
2.0L 8V 85kW/114HP BOSCH GOLF 3 (A3)
2.0L 16V 110kW/148HP 5WP4 GOLF 3 (A3)
1.4L 8V 44kW/59HP MOTRONIC GOLF 3 (A3)
1.6L 8V 55kW/74HP MOTRONIC GOLF 3 (A3)
1.8L 8V 66kW/89HP MOTRONIC GOLF 3 (A3)
1.9L TDI 66kW/89HP DIL PASSAT 3 (B3)
1.6L 8V 54kW/72HP MOTRONIC PASSAT 3 (B3)
1.8L 8V 81kW/109HP MOTRONIC PASSAT 3 (B3)
1.9L TDI 66kW/89HP EDC 1.3.3

→ All ECUs VOLKSWAGEN