Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 34 firmware versions
Vehicle data
| Brand | VOLKSWAGEN |
| Model | CADDY MK3 (2K) |
| Engine | 2.0L 16V TDI 103kW/138HP EDC17C46 |
| Stock power | 140 CV / 103 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | LCV |
ECU
| Manufacturer | BOSCH |
| Model | EDC17C46 |
| Memory / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Available tuning operations / options:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 6
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware identifiers (34)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.94.013 | 03L906018CA 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.044 | 03L906018BT 7805 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018BT 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.004 | 03L906018NF 9981 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018NP 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.027 | 03L906018NL 3359 |
BOSCH EDC17C46 |
| — | — |
1.94.020 | 03L906018DD 4319 |
BOSCH EDC17C46 |
| — | — |
1.94.008 | 03L906018NG 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018NG 6638 |
BOSCH EDC17C46 |
| — | — |
1.94.007 | 03L906018DC 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.002 | 03L906018DD 9981 |
BOSCH EDC17C46 |
| — | — |
1.94.010 | 03L906018NG 0864 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L906018DC 2296 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018NL 0666 |
BOSCH EDC17C46 |
| — | — |
1.94.008 | 03L906018DC 9978 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L906018PG 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018NF 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.005 | 03L906018NG 3358 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018NF 0863 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018DD 9979 |
BOSCH EDC17C46 |
| — | — |
1.00.012 | 03L906018NL 6640 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018NG 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.003 | 03L906018BT 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.019 | 03L906018DD 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.003 | 03L906018DD 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.019 | 03L906018NL 1184 |
BOSCH EDC17C46 |
| — | — |
1.94.019 | 03L906018MC 0184 |
BOSCH EDC17C46 |
| — | — |
1.00.004 | 03L906018PG 3495 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018BT 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018NF 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.008 | 03L906018NF 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.011 | 03L906018MC 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.002 | 03L906018CA 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.022 | 03L906018NF 0660 |
BOSCH EDC17C46 |
ECU notes
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
