VOLKSWAGEN BORA A4 2.0L 8V 85kW/114HP ME7.5

ECU BOSCH ME7.5 · 116 CV (85 kW) · 2000 cc · Benzina aspirato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN BORA A4 2.0L 8V 85kW/114HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelBORA A4
Engine2.0L 8V 85kW/114HP ME7.5
Stock power116 CV / 85 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612012711037379193 1.21.00606A906032TS 8122 BOSCH ME7.5
02612069081037350122 1.21.02506A906032BP 3656 BOSCH ME7.5
02612070801037360930 1.21.01306A906032DS 3892 BOSCH ME7.5
02612073651037362572 1.21.01706A906032FN 4071 BOSCH ME7.5
02612081261037368688 1.21.01206A906032NG 0302 BOSCH ME7.5
02612081261037368688 1.21.00706A906032NG 0302 BOSCH ME7.5
02612081291037367575 1.21.00806A906032ND 0202 BOSCH ME7.5
02612081301037367576 1.21.01306A906032NE 0202 BOSCH ME7.5
02612081301037366849 1.21.00706A906032NE 0201 BOSCH ME7.5
02612088591037372555 1.21.02106G906032B 0401 BOSCH ME7.5.10

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata On this epron can be set a KEY.