VOGE BRIVIDO 500R 21->24 32kW

ECU BOSCH MSE6.0 · 44 CV (32 kW) · 470 cc · Benzina aspirato

ECU DatabaseVOGE › VOGE BRIVIDO 500R 21->24 32kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandVOGE
ModelBRIVIDO 500R
Engine21->24 32kW
Stock power44 CV / 32 kW
Displacement470 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelMSE6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
X50704A1A1 1.88.008F01RB0DHJ8 BOSCH MSE6.0
F01R0ADR6X 1.88.007F01R00DHJ8 BOSCH MSE6.0
F01R0ADP2R 1.88.011F01R00DL3U BOSCH MSE6.0

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata