SWM MOTORCYCLES GRAN MILANO 500 23->25 35kW

ECU BOSCH MSE6.0 · 48 CV (35 kW) · 490 cc · Benzina aspirato

ECU DatabaseSWM MOTORCYCLES › SWM MOTORCYCLES GRAN MILANO 500 23->25 35kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandSWM MOTORCYCLES
ModelGRAN MILANO 500
Engine23->25 35kW
Stock power48 CV / 35 kW
Displacement490 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelMSE6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Base timing 2
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • Speed limiter 2
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
XM0204AI18 1.88.020F01RB0DK7F BOSCH MSE6.0

Vehicle technical notes

OBD placed under the saddle
ECU located under the driver's seat. Difficulty: medium.

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata