SMART FORTWO-FORFOUR W453 0.9L 3Cyl TURBO 66kW/89HP ME17.7.20 — ECU BOSCH ME17.7.20

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Get the file for this vehicle

Available tuning operations / options:

Base timing
Optimal spark timing/MBT
Knock correction advance max
Boost pressure limiter
Boost limiter correction for APS/BPS sensor
Desired engine load calculation
Lambda correction for engine temperature after starting
Maximum torque limitation at clutch
Desired pressure ratio
Exhaust gas temperature
Characteristic line correction factor for pressure ratio for turbocharger overspeed protection
Factor to correct fuel delivery system
Factor for reducing maximum filling
High pressure fuel pump setpoint
Advance limiter for component protection 1
Lambda enrichment for components protection
Lambda correction for exhaust manifold temperature
Knock detection factor
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Max torque profile
Optimal engine moment
Power limit torque table
Relative permissible torque from the pedal position in torque limitation
% relative air filling limit depending on IAT
Driver torque request
Torque limiter for selected gear
Throttle angle management
Turbocharger volumetric efficiency
Wastegate duty-cycle

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	1037541590	1.94.003	10SW000252	BOSCH ME17.7.20
—	1037541590	1.94.006	10SW013345	BOSCH ME17.7.20
—	1037541590	1.94.003	10SW008141	BOSCH ME17.7.20
—	1037541590	1.94.010	10SW003998	BOSCH ME17.7.20

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

Microprocessor TC1782 To work on this ECU you can use NewTrasdata

The Genius OBD + Bench € 2.500 Buy