Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 4 firmware versions
Vehicle data
| Brand | SKODA |
| Model | SUPERB (B8) |
| Engine | 2.0L 16V TDI 110kW/148HP MD1CS004 |
| Stock power | 150 CV / 11 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MD1CS004 |
| Memory / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Available tuning operations / options:
- Boost pressure limiter
- Boost limiter correction for APS/BPS sensor
- Maximum torque limitation at clutch
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection opening time related to inj. pressure
- J
- Injection 2
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 3
- Speed limiter
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 3
- Specific injection pressure 4
- Specific injection pressure 5
- Q
- Driver torque request
- Driver torque request 2
- Setpoint maximum turbocharger speed
- Overboost timing
- Overboost timing 2
- Turbocharger volumetric efficiency
Firmware identifiers (4)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.02.008 | 05L906022BK 9889 |
BOSCH MD1CS004 |
| — | — |
1.02.003 | 05L906022 0969 |
BOSCH MD1CS004 |
| — | — |
1.02.013 | 05L906022A 0827 |
BOSCH MD1CS004 |
| — | — |
1.02.008 | 05L906022BK 9971 |
BOSCH MD1CS004 |
Vehicle technical notes
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU notes
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
