SKODA FABIA Mk1 (6Y) 2.0L 8V 90kW/120HP ME7.5

ECU BOSCH ME7.5 · 122 CV (9 kW) · 2000 cc · Benzina aspirato

ECU DatabaseSKODA › SKODA FABIA Mk1 (6Y) 2.0L 8V 90kW/120HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 3 firmware versions

Vehicle data

BrandSKODA
ModelFABIA Mk1 (6Y)
Engine2.0L 8V 90kW/120HP ME7.5
Stock power122 CV / 9 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612067191037363011 1.21.01106A906032JQ 4214 BOSCH ME7.5
02612069281037360168 1.21.01806A906032CC 3658 BOSCH ME7.5
02612082771037367537 1.21.00906A906032PN 1501 BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop