SEAT TOLEDO (1M) 1.8L 20V 134kW/179HP ME7.5

ECU BOSCH ME7.5 · 182 CV (134 kW) · 1800 cc · Benzina aspirato

ECU DatabaseSEAT › SEAT TOLEDO (1M) 1.8L 20V 134kW/179HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandSEAT
ModelTOLEDO (1M)
Engine1.8L 20V 134kW/179HP ME7.5
Stock power182 CV / 134 kW
Displacement1800 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612075341037360907 1.21.02006A906032EE 0001 BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.