SAAB 9-3 Mk1/Mk2 1.9L 8V/16V TID 110kW/148HP EDC16C9

ECU BOSCH EDC16C9 · 150 CV (11 kW) · 1900 cc · Diesel sovralimentato

ECU DatabaseSAAB › SAAB 9-3 Mk1/Mk2 1.9L 8V/16V TID 110kW/148HP EDC16C9

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 7 firmware versions

Vehicle data

BrandSAAB
Model9-3 Mk1/Mk2
Engine1.9L 8V/16V TID 110kW/148HP EDC16C9
Stock power150 CV / 11 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16C9
Memory / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection at part load
  • Injection at full throttle
  • Injection 1
  • Speed / RPM limiter
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure
  • Specific air mass charge 2
  • Air mass flow
  • Overboost timing

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810119701037372717 1.52.0121037366670 BOSCH EDC16C9
02810119701037376166 1.52.0041037366670 BOSCH EDC16C9
02810122471037372565 1.52.028 BOSCH EDC16C9
02810132251037378681 1.52.010 BOSCH EDC16C9
02810138071037380267 1.52.025 BOSCH EDC16C9
02810138071037A50318 1.52.020 BOSCH EDC16C9
02810138071037A50318 1.52.0081037366670 BOSCH EDC16C9

ECU notes

Original EPROM SSOP 56 pins 29BL802CB. To read this EPROM you MUST USE EMP21 programmer with the E21SSOP56_AMD adapters for SSOP 56 pins. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):