RENAULT TWINGO 2 1.6L 16V RS 98kW/131HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 133 CV (98 kW) · 1600 cc · Benzina aspirato

ECU DatabaseRENAULT › RENAULT TWINGO 2 1.6L 16V RS 98kW/131HP SIM32

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 8 firmware versions

Vehicle data

BrandRENAULT
ModelTWINGO 2
Engine1.6L 16V RS 98kW/131HP SIM32
Stock power133 CV / 98 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIM32
Memory / EPROMMicro RENESAS - 4096 Kbit - 80000

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
82007006008201192019 1.73.0098201100830 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201144145 1.73.0058201062724 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201123308 1.73.0168201123305 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201038576 1.73.0178201018098 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201513730 1.73.0038201100830 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200983423 1.73.0188200824374 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201315698 1.73.0228201315699 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201106423 1.73.0148201100830 CONTINENTAL-SIEMENS-VDO SIM32

ECU notes

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata