RENAULT SCENIC 3 1.5L 8V dCi 81kW/109HP SID305/306

ECU CONTINENTAL-SIEMENS-VDO SID305 · 110 CV (81 kW) · 1500 cc · Diesel sovralimentato

ECU DatabaseRENAULT › RENAULT SCENIC 3 1.5L 8V dCi 81kW/109HP SID305/306

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 16 firmware versions

Vehicle data

BrandRENAULT
ModelSCENIC 3
Engine1.5L 8V dCi 81kW/109HP SID305/306
Stock power110 CV / 81 kW
Displacement1500 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSID305
Memory / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

Available tuning operations / options:

  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in regular injection mode
  • Boost pressure
  • Boost pressure 2
  • Boost pressure in regular injection mode
  • Effective engine torque setpoint for safety
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • Torque limiter for diagnostic
  • Maximum absolute effective torque
  • Maximum indicated torque
  • Maximum indicated torque in regeneration mode
  • Main torque model during regular combustion mode
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Air mass flow
  • Torque limiter for EFT sensor
  • Torque limiter for intake manifold pressure
  • Torque limiter for intake manifold pressure in regeneration mode
  • Torque model - fuel quantity to torque conversion
  • Torque model - fuel quantity to torque conversion - particulate regeneration mode
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode

Firmware identifiers (16)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0033R0777R 1.83.0041547R CONTINENTAL-SIEMENS-VDO SID305
0037R0348R 1.83.0070796R CONTINENTAL-SIEMENS-VDO SID305
0037R0386R 1.83.0084636R CONTINENTAL-SIEMENS-VDO SID305
0037R1478R 1.83.0082774R CONTINENTAL-SIEMENS-VDO SID305
0037R0348R 1.83.0020525R CONTINENTAL-SIEMENS-VDO SID305
0037R1478R 1.83.0073151R CONTINENTAL-SIEMENS-VDO SID305
0037R1478R 1.83.0114636R CONTINENTAL-SIEMENS-VDO SID305
0037R0348R 1.83.0102610R CONTINENTAL-SIEMENS-VDO SID305
0669R3956R 1.83.0028039R CONTINENTAL-SIEMENS-VDO SID305
0669R0668R 1.83.0031493R CONTINENTAL-SIEMENS-VDO SID305
0669R3956R 1.83.0108034R CONTINENTAL-SIEMENS-VDO SID305
0669R1495R 1.83.0072771R CONTINENTAL-SIEMENS-VDO SID305
0669R3956R 1.83.0105530R CONTINENTAL-SIEMENS-VDO SID305
0669R0668R 1.83.0074285R CONTINENTAL-SIEMENS-VDO SID305
0669R0668R 1.83.0151019R CONTINENTAL-SIEMENS-VDO SID306
1908R3571R 1.83.0093573R CONTINENTAL-SIEMENS-VDO SID307

ECU notes

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1767 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop