RENAULT CLIO 2 1.6L 16V 79kW/106HP SIRIUS34

ECU CONTINENTAL-SIEMENS-VDO SIRIUS 32 · 107 CV (79 kW) · 1600 cc · Benzina aspirato

ECU DatabaseRENAULT › RENAULT CLIO 2 1.6L 16V 79kW/106HP SIRIUS34

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 13 firmware versions

Vehicle data

BrandRENAULT
ModelCLIO 2
Engine1.6L 16V 79kW/106HP SIRIUS34
Stock power107 CV / 79 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIRIUS 32
Memory / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Available tuning operations / options:

  • Advance at part load
  • Advance correction
  • Weighting map cold-start
  • Injection at part load
  • RPM Limiter
  • Fuel mass injection at start up

Firmware identifiers (13)

Hardware No.Software No. (chip)VersionUpdate softwareECU
82002981628200323729 1.25.008 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200691380 1.25.004 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82000802858200172327 1.28.017 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200204242 1.28.006 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200303502 1.28.010 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200217757 1.28.002 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82000802858200214979 1.28.004 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003263758200326831 1.28.008 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82003267358200326831 1.28.008 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82004233378200758748 1.28.005 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82004233378200601326 1.28.011 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82004233378200483451 1.28.004 CONTINENTAL-SIEMENS-VDO SIRIUS 34
82007818238201158471 1.28.004 CONTINENTAL-SIEMENS-VDO SIRIUS 34

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F200BB. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata