PRINOTH HUSKY 4.2L 130kW/174HP TEMIC — ECU TEMIC TEMIC PLD

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	PRINOTH
Model	HUSKY
Engine	4.2L 130kW/174HP TEMIC
Stock power	177 CV / 13 kW
Displacement	4200 cc
Fuel	Diesel sovralimentato
Vehicle type	Ohv

ECU

Manufacturer	TEMIC
Model	TEMIC PLD
Memory / EPROM	MICRO INFINEON XC2287 - 6144Kbit - C0000

Available tuning operations / options:

Max threshold air mass flow throught compressor
Boost pressure limiter
Protection for engine overheating
Protection for engine overheating 2
Protection for engine overheating 3
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection angle
Injection angle 2
Injection angle - correction
Injection delivery angle
Smoke limiter
Maximum indicated torque
Max torque profile

Firmware identifiers (4)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	23F	1.54.003	—	TEMIC TEMIC PLD
—	56E	1.54.017	—	TEMIC TEMIC PLD
—	08E	1.54.014	—	TEMIC TEMIC PLD
—	60A	1.54.015	—	TEMIC TEMIC PLD

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.

This Setting File can be used for serial system NewGenius.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other PRINOTH

LEITWOLF
12.8L 320kW/430HP EDC7C32 HUSKY
4.2L 145kW/194HP TEMIC LEITWOLF
12.8L 390kW/530HP HDEP MCM2.1 HUSKY
5.1L 170kW/228HP HDEP MCM2.1 RAPTOR
500 L9 8.9L 321kW/430HP CM2350A LEITWOLF
510 12.8L 375kW/503HP TEMIC RAPTOR
800 18.1L 470kW/630HP ADEM IV RAPTOR
300 7.1L 205kW/275HP A5E2V2I1

→ All ECUs PRINOTH