PORSCHE CAYENNE (9PA) 3.2L V6 24V 184kW/247HP ME7.1.1

ECU BOSCH ME7.1.1 · 250 CV (184 kW) · 3200 cc · Benzina aspirato

ECU DatabasePORSCHE › PORSCHE CAYENNE (9PA) 3.2L V6 24V 184kW/247HP ME7.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 19 firmware versions

Vehicle data

BrandPORSCHE
ModelCAYENNE (9PA)
Engine3.2L V6 24V 184kW/247HP ME7.1.1
Stock power250 CV / 184 kW
Displacement3200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware identifiers (19)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.21.013 BOSCH ME7.1.1
02612077141037369745 1.21.0036SE2ASN2000 0076 BOSCH ME7.1.1
02612077141037381663 1.21.0036SLVAKN1000 0167 BOSCH ME7.1.1
02612077141037368693 1.21.0046SLVASN0000 0040 BOSCH ME7.1.1
02612077141037370536 1.21.0106SE4MSN1000 0089 BOSCH ME7.1.1
02612077141037368694 1.21.0146SE4ASN0000 0038 BOSCH ME7.1.1
02612077141037370542 1.21.0056SE2ASN3000 0085 BOSCH ME7.1.1
02612077141037370540 1.21.0076SLVASN3000 0087 BOSCH ME7.1.1
02612077141037370539 1.21.0116SE4ASN3000 0086 BOSCH ME7.1.1
02612077141037371189 1.21.0056SLVAKN0000 0136 BOSCH ME7.1.1
02612086681037382314 1.21.0086SE4ASN6000 0177 BOSCH ME7.1.1
02612086681037371198 1.21.0066SE4MSN2000 0111 BOSCH ME7.1.1
02612086681037371701 1.21.0036SLVASN4000 0112 BOSCH ME7.1.1
02612086681037381917 1.21.0036SLVASN8000 0172 BOSCH ME7.1.1
02612086681037371703 1.21.0126SE4ASN4000 0110 BOSCH ME7.1.1
02612086681037382520 1.21.0046SE4MSN4000 0202 BOSCH ME7.1.1
02612086681037382335 1.21.0056SE2ASN6000 0184 BOSCH ME7.1.1
02612086681037376795 1.21.0076SLVASN6000 0148 BOSCH ME7.1.1
02612086681037371704 1.21.0056SE2ASN4000 0108 BOSCH ME7.1.1

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop