OPEL / SATURN / VAUXHALL CASCADA 1.6L 16V TURBO 125kW/168HP DELCO E80

ECU DELCO E80 · 170 CV (125 kW) · 1600 cc · Benzina sovralimentato

ECU DatabaseOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL CASCADA 1.6L 16V TURBO 125kW/168HP DELCO E80

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandOPEL / SATURN / VAUXHALL
ModelCASCADA
Engine1.6L 16V TURBO 125kW/168HP DELCO E80
Stock power170 CV / 125 kW
Displacement1600 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE80
Memory / EPROMMicro BGA ST MPC5676 - 600000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Boost pressure
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management
  • WG duty cycle vs RPM and boost

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1265368112677775 1.91.00255491845 DELCO E80
1266636212680882 1.00.00955499692 DELCO E80

ECU notes

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata