Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 19 firmware versions
Vehicle data
| Brand | NISSAN |
| Model | QASHQAI (J10) |
| Engine | 1.6L 16V dCi 96kW/128HP EDC17C42 |
| Stock power | 130 CV / 96 kW |
| Displacement | 1600 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC17C42 |
| Memory / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Maximum torque limitation at clutch
- Effective engine torque setpoint
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value before turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Engine torque limit for transmission protection
- Max torque correction factor for APS sensor
- Max torque correction factor for APS sensor in aftertreatment modes
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Injection opening time related to inj. pressure
- Torque limiter for diagnostic
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Main torque model during regular combustion mode
- Specific injection pressure limiter
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Air mass flow
- Air mass flow in aftertreatment modes
- Maximum temperature before turbine for diagnosis
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Theoretical maximum engine power
- Theoretical maximum engine power 2
- Torque model - fuel quantity to torque conversion
Firmware identifiers (19)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 1074R | 1037522031 |
1.94.027 | BB53B |
BOSCH EDC17C42 |
| 1074R | 1037521884 |
1.94.005 | BB55A |
BOSCH EDC17C42 |
| 1074R | 1037539173 |
1.94.007 | BB60C |
BOSCH EDC17C42 |
| 1074R | 1037523726 |
1.94.013 | BB55B |
BOSCH EDC17C42 |
| 1074R | 1037521233 |
1.94.004 | BB52C |
BOSCH EDC17C42 |
| 1074R | 1037523727 |
1.94.003 | BB55C |
BOSCH EDC17C42 |
| 1074R | 1037521873 |
1.94.003 | BB54E |
BOSCH EDC17C42 |
| 1074R | 1037521232 |
1.94.009 | BB54B |
BOSCH EDC17C42 |
| 1074R | 1037524454 |
1.94.018 | BB55E |
BOSCH EDC17C42 |
| 1074R | 1037529103 |
1.94.014 | BB56B |
BOSCH EDC17C42 |
| 1074R | 1037529103 |
1.94.006 | BB58E |
BOSCH EDC17C42 |
| 1074R | 1037529099 |
1.94.021 | BB56A |
BOSCH EDC17C42 |
| 1074R | 1037539944 |
1.94.008 | BB60E |
BOSCH EDC17C42 |
| 1074R | 1037521231 |
1.94.008 | BB54A |
BOSCH EDC17C42 |
| 1074R | 1037521375 |
1.94.006 | BB54C |
BOSCH EDC17C42 |
| 1074R | 1037524453 |
1.94.021 | BB55D |
BOSCH EDC17C42 |
| 1074R | 1037521377 |
1.94.017 | BB54D |
BOSCH EDC17C42 |
| 1074R | 1037539485 |
1.94.010 | BB60D |
BOSCH EDC17C42 |
| 1074R | 1037539172 |
1.94.032 | BB59E |
BOSCH EDC17C42 |
Vehicle technical notes
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU notes
MICRO Infineon Tricore TC1767 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
