Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
8 firmware versions
Vehicle data
| Brand | NEW HOLLAND AGRICULTURE |
| Model | FR |
| Engine | 9060 13L 435kW/583HP EDC7UC31 |
| Stock power | 591 CV / 435 kW |
| Displacement | 13000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Tractor |
ECU
| Manufacturer | BOSCH |
| Model | EDC7UC31 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Injection angle characterization
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter stage 3 active
- Turbocharger volumetric efficiency
Firmware identifiers (8)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.67.013 | P342V91 Rzmxcn08.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.018 | P342V91 Rzmxcn08.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P342VE02 rzmxzc00.cj2 |
BOSCH EDC7UC31 |
| — | — |
1.67.014 | P342VE02 Rzmxzc04.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.021 | P342VE02 Rzmxzc03.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.011 | P342VE02 Rzmxzc03.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.022 | P342V91 Rzmxcn04.cj0 |
BOSCH EDC7UC31 |
| — | — |
1.67.006 | P342VE0 Rzmxzc03.cj0 |
BOSCH EDC7UC31 |
ECU notes
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Get the file for this vehicle
Tools to read and write this ECU
