MV AGUSTA BRUTALE 800 RR 15->20 103kW

ECU ELDOR NEMO 2.0 · 140 CV (103 kW) · 800 cc · Benzina aspirato

ECU DatabaseMV AGUSTA › MV AGUSTA BRUTALE 800 RR 15->20 103kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 18 firmware versions

Vehicle data

BrandMV AGUSTA
ModelBRUTALE 800 RR
Engine15->20 103kW
Stock power140 CV / 103 kW
Displacement800 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerELDOR
ModelNEMO 2.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware identifiers (18)

Hardware No.Software No. (chip)VersionUpdate softwareECU
M3A36R-0911 1.00.0030911UP15 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911UP16 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911UR15 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911UY15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913G005 ELDOR NEMO 2.0
M3A36R-0908 1.00.0240908HY06 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913GB05 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913GC05 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913GK05 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908GP14 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908GY14 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908UM14 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908UP14 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908UR14 ELDOR NEMO 2.0
M3A36R-0908 1.00.0030908UY14 ELDOR NEMO 2.0
M3A36R-0911 1.00.0080911UM15 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911GP15 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911GR15 ELDOR NEMO 2.0

Vehicle technical notes

OBD placed under the saddle

ECU notes

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.