MOTO MORINI X-CAPE 700 25->25 52kW

ECU BOSCH MSE6.0 · 70 CV (52 kW) · 690 cc · Benzina aspirato

ECU DatabaseMOTO MORINI › MOTO MORINI X-CAPE 700 25->25 52kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandMOTO MORINI
ModelX-CAPE 700
Engine25->25 52kW
Stock power70 CV / 52 kW
Displacement690 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelMSE6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
X10K04A126 1.88.006F01R00DF8G BOSCH MSE6.0

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata