Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
13 firmware versions
Vehicle data
| Brand | MITSUBISHI |
| Model | GRANDIS |
| Engine | 2.0L 16V DI-D 100kW/134HP EDC16+ U31 |
| Stock power | 136 CV / 1 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16U31 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Smoke limiter 2
- Main injection duration angle
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- Exhaust gas temperature
- Exhaust gas temperature 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- Injection 1
- Injection in aftertreatment modes 1
- L
- Torque limiter
- Smoke limiter
- RPM limiter - fuel cut
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request 2
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware identifiers (13)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 1037378024 |
1.67.015 | 1037378024 |
BOSCH EDC16U31 |
| — | 1037390973 |
1.67.022 | 1037390973 |
BOSCH EDC16U31 |
| — | 1037390158 |
1.67.013 | 1037390973 |
BOSCH EDC16U31 |
| — | 1037378025 |
1.67.017 | 1037379997 |
BOSCH EDC16U31 |
| — | 1037377307 |
1.67.015 | 1037386353 |
BOSCH EDC16U31 |
| — | 1037377307 |
1.67.030 | 1037377307 |
BOSCH EDC16U31 |
| — | 1037377308 |
1.67.011 | 1037377308 |
BOSCH EDC16U31 |
| — | 1037379997 |
1.67.020 | 1037386353 |
BOSCH EDC16U31 |
| — | 1037386353 |
1.67.010 | 1037386353 |
BOSCH EDC16U31 |
| — | 1037377307 |
1.67.021 | 1037379997 |
BOSCH EDC16U31 |
| — | 1037376110 |
1.67.024 | 1037376110 |
BOSCH EDC16U31 |
| — | 1037378025 |
1.67.012 | 1037386353 |
BOSCH EDC16U31 |
| — | 1037378025 |
1.67.021 | 1037378025 |
BOSCH EDC16U31 |
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
