MINI R50/R52/R53 COOPER S 1.6L 16V JCW 155kW/208HP EMS2

ECU CONTINENTAL-SIEMENS-VDO EMS2 (SIRIUS 32) · 211 CV (155 kW) · 1600 cc · Benzina sovralimentato

ECU DatabaseMINI › MINI R50/R52/R53 COOPER S 1.6L 16V JCW 155kW/208HP EMS2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandMINI
ModelR50/R52/R53 COOPER S
Engine1.6L 16V JCW 155kW/208HP EMS2
Stock power211 CV / 155 kW
Displacement1600 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelEMS2 (SIRIUS 32)
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT - monitoring
  • Optimal spark timing/MBT - monitoring 2
  • Advance correction
  • Advance correction 2
  • Advance correction 3
  • Advance correction 4
  • Advance correction - overheating protection
  • Maximum torque limitation at clutch
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • ECT for fan engagement
  • Cooling fan relay activations
  • Engine idle vs. ECT sensor
  • Minimum engine speed - monitoring activation condition
  • HFM/HLM threshold for diagnosis
  • Acceleration enrichment
  • Injector latency
  • Injector scaling
  • Injector scaling - fuel consumption factor
  • RPM limiter - AT
  • RPM limiter - monitoring - AT
  • RPM limiter - monitoring - MT
  • RPM limiter - MT
  • MAF - limp home mode
  • MAF rate
  • MAF substitute - monitoring
  • MAP - limp home mode
  • Maximum indicated torque
  • Specific air mass charge
  • Specific air mass charge 2
  • Specific air mass flow quantity limiter
  • Specific air mass flow quantity limiter - AT
  • Driver torque request
  • Vehicle speed activation limit for the cooling fan speed

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
S122237006BS122241518B 1.29.015 CONTINENTAL-SIEMENS-VDO EMS2 (SIRIUS 32)

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. For increase the boost pressure it is necessary to modify the Kompressor pulley. The boost charger is NOT managed by ECU.