ECU Database ›
MINI › MINI F55/F56/F57 2.0L L4 16V COOPER SD 125kW/168HP DME__DDE803S
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 8 firmware versions
Vehicle data
| Brand | MINI |
| Model | F55/F56/F57 |
| Engine | 2.0L L4 16V COOPER SD 125kW/168HP DME__DDE803S |
| Stock power | 170 CV / 125 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MD1CS001 (DME__DDE803S) |
| Memory / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure
- Max accepted exhaust gas temperature value after turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Exhaust gas temperature
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Maximum injection period
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Injection 3
- Injection 4
- Torque limiter 2
- L
- Torque limiter 4
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for diagnostic 2
- Torque limiter for diagnostic 4
- Torque limiter for diagnostic 5
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Maximum engine torque at crank shaft
- Maximum engine power
- Protection for fuel overheating
- Protection for fuel overheating 2
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Max rail pressure setpoint increase per s
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- CAT upstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- EGT sensor thresholds on CAT for diagnosis
- EGT sensor thresholds on DPF for diagnosis
- Torque limiter in recovery mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Firmware identifiers (8)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
| 00003DAC050B00 | 00003DAD050B00 |
1.94.008 | 000057FF050B01 |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC060B00 | 00003DAD060B02 |
1.94.007 | 000057FF060B3D |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC060B00 | 00003DAD060B02 |
1.94.009 | 000057FF060B37 |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC061100 | 00003DAD061100 |
1.00.007 | 000057FF06110A |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC061700 | 00003DAD061700 |
1.94.007 | 000057FF061704 |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC061900 | 00003DAD061900 |
1.94.027 | 000057FF061903 |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC061900 | 00003DAD061900 |
1.94.008 | 000057FF061905 |
BOSCH MD1CS001 (DME__DDE803S) |
| 00003DAC062000 | 00003DAD062000 |
1.94.011 | 000057FF062012 |
BOSCH MD1CS001 (DME__DDE803S) |
ECU notes
Micro Infineon Tricore TC298TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU