MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

ECU BOSCH EDC15C6 · 163 CV (12 kW) · 2700 cc · Diesel sovralimentato

ECU DatabaseMERCEDES › MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandMERCEDES
ModelM CLASS W163
EngineML270 2.7L 20V CDI 120kW/161HP EDC15
Stock power163 CV / 12 kW
Displacement2700 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15C6
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Injection for boost pressure sensor 1
  • injection for boost pressure sensor 2
  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810102831037351225 1.05.023 BOSCH EDC15C6
02810102831037351225 1.05.019 BOSCH EDC15C6
02810103101037351226 1.05.002 BOSCH EDC15C6
02810105181037351393 1.05.004 BOSCH EDC15C6
02810105371037351544 1.05.009 BOSCH EDC15C6
02810105461037351417 1.05.022 BOSCH EDC15C6
02810105461037351417 1.05.028 BOSCH EDC15C6
02810107961037351671 1.05.032 BOSCH EDC15C6
02810114071037365119 1.05.006 BOSCH EDC15C6
02810114081037365120 1.05.051 BOSCH EDC15C6

ECU notes

original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.