MERCEDES CLS CLASS C219 CLS55 AMG 5.5L V8 32V 350kW/469HP ME2.8

ECU BOSCH ME2.8 · 476 CV (35 kW) · 5500 cc · Benzina aspirato

ECU DatabaseMERCEDES › MERCEDES CLS CLASS C219 CLS55 AMG 5.5L V8 32V 350kW/469HP ME2.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 7 firmware versions

Vehicle data

BrandMERCEDES
ModelCLS CLASS C219
EngineCLS55 AMG 5.5L V8 32V 350kW/469HP ME2.8
Stock power476 CV / 35 kW
Displacement5500 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME2.8
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Boost limiter correction for APS/BPS sensor
  • Load / throttle position reference
  • Engine filling management
  • RPM Limiter
  • RPM limiter for LSD
  • Boost pressure linearization
  • Speed limiter
  • Maximum indicated torque
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Relative permissible torque from the pedal position in torque limitation
  • Requested engine filling
  • Variable intake pulsation correction

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.16.015 BOSCH ME2.8
11315305911037377816 1.16.017 BOSCH ME2.8
11315307911037377820 1.16.026 BOSCH ME2.8
11315315911037382938 1.16.026 BOSCH ME2.8
11315327911037390726 1.16.006 BOSCH ME2.8
11315363791037365249 1.16.012 BOSCH ME2.8
11315387791037365257 1.16.016 BOSCH ME2.8

ECU notes

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.