MERCEDES C CLASS W203 C270 2.7L 20V CDI 125kW/168HP EDC15C6

ECU BOSCH EDC15C6 · 170 CV (125 kW) · 2700 cc · Diesel sovralimentato

ECU DatabaseMERCEDES › MERCEDES C CLASS W203 C270 2.7L 20V CDI 125kW/168HP EDC15C6

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 11 firmware versions

Vehicle data

BrandMERCEDES
ModelC CLASS W203
EngineC270 2.7L 20V CDI 125kW/168HP EDC15C6
Stock power170 CV / 125 kW
Displacement2700 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15C6
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Injection for boost pressure sensor 1
  • injection for boost pressure sensor 2
  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810105311037351406 1.05.023 BOSCH EDC15C6
02810108021037351642 1.05.005 BOSCH EDC15C6
02810108571037351718 1.05.014 BOSCH EDC15C6
02810108571037351718 1.05.020 BOSCH EDC15C6
02810108581037351719 1.05.002 BOSCH EDC15C6
02810109121037351740 1.05.013 BOSCH EDC15C6
02810110571037351862 1.05.003 BOSCH EDC15C6
02810110681037351884 1.05.011 BOSCH EDC15C6
02810111821037365037 1.05.015 BOSCH EDC15C6
02810118281037365306 1.05.007 BOSCH EDC15C6
02810121961037365327 1.05.012 BOSCH EDC15C6

ECU notes

original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop