MERCEDES TRUCK ACTROS 1823 6.4L L6 170kW/228HP TEMIC — ECU TEMIC TEMIC PLD

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	MERCEDES TRUCK
Model	ACTROS
Engine	1823 6.4L L6 170kW/228HP TEMIC
Stock power	231 CV / 17 kW
Displacement	6400 cc
Fuel	Diesel sovralimentato
Vehicle type	Tir

ECU

Manufacturer	TEMIC
Model	TEMIC PLD
Memory / EPROM	29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Available tuning operations / options:

Max threshold air mass flow throught compressor
Boost pressure limiter
Protection for engine overheating
Protection for engine overheating 2
Protection for engine overheating 3
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection angle
Injection angle 2
Injection angle - correction
Injection delivery angle
Smoke limiter
Maximum indicated torque
Max torque profile

Firmware identifiers (4)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	56E	1.54.017	—	TEMIC TEMIC PLD
—	53G	1.54.014	—	TEMIC TEMIC PLD
—	08E	1.54.005	—	TEMIC TEMIC PLD
—	E51	1.54.006	—	TEMIC TEMIC PLD

ECU notes

Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other MERCEDES TRUCK

1853
15L V8 390kW/523HP MS5 ACTROS
1843 12L V6 315kW/422HP TEMIC ACTROS
1848 16L V8 350kW/473HP TEMIC ACTROS
1853 16L V8 390kW/523HP TEMIC ACTROS
1857 16L V8 419kW/565HP TEMIC 2053
22.6L V12 390kW/523HP MS5 ACTROS
1831 12L V6 235kW/315HP TEMIC ACTROS
4143 12L V6 320kW/429HP TEMIC 2638
18L V10 280kW/375HP MS5 1844
10.9L V6 324kW/434HP MS5

→ All ECUs MERCEDES TRUCK