MAZDA CX-5 (KE) 2.0L 16V SKYACTIV-G 121kW/162HP DENSO MH8501

ECU DENSO MB_MH8501_GGD · 165 CV (121 kW) · 2000 cc · Benzina aspirato

ECU DatabaseMAZDA › MAZDA CX-5 (KE) 2.0L 16V SKYACTIV-G 121kW/162HP DENSO MH8501

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 7 firmware versions

Vehicle data

BrandMAZDA
ModelCX-5 (KE)
Engine2.0L 16V SKYACTIV-G 121kW/162HP DENSO MH8501
Stock power165 CV / 121 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerDENSO
ModelMB_MH8501_GGD
Memory / EPROMMICRO MITSUBISHI - 16384 Kbit - 200000

Available tuning operations / options:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed - high octane
  • Minimum advance allowed - low octane
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Enrichment for closed loop
  • Exhaust gas temperature
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint for ECT sensor
  • RPM Limiter
  • RPM Limiter 2
  • Speed limiter
  • MAF calibration vs voltage
  • Max torque profile
  • Max torque profile in Sport mode
  • Enrichment for open loop
  • Specific injection pressure
  • Driver torque request
  • Throttle angle management
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
PE03-188K1-PE03-18881-L 1.00.020PE03-188K2-L DENSO MB_MH8501_GGD
PE03-188K1-PE03-18881-J 1.00.013PE03-188K2-J DENSO MB_MH8501_GGD
PE1S-188K1-PE1S-18881-L 1.00.008PE1S-188K2-L DENSO MB_MH8501_GGD
PE3L-188K1-PEHA-18881-D 1.00.006PEHA-188K2-D DENSO MB_MH8501_GGD
PE3L-188K1-PE3W-18881-C 1.00.007PE3W-188K2-C DENSO MB_MH8501_GGD
PELT-188K1-PS85-18881-D 1.00.005PS85-188K2-D DENSO MB_MH8501_GGD
PSKJ-188K1-PSKJ-18881-C 1.00.005PSKJ-188K2-C DENSO MB_MH8501_GGD

ECU notes

Microprocessor MH8501F This Setting File can be used for serial system NewGenius.