LEXUS GS (L10) GS 350 3.5L 24V 203kW/272HP DENSO — ECU DENSO 275036-2110

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 9 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	LEXUS
Model	GS (L10)
Engine	GS 350 3.5L 24V 203kW/272HP DENSO
Stock power	276 CV / 203 kW
Displacement	3500 cc
Fuel	Benzina aspirato
Vehicle type	Auto

ECU

Manufacturer	DENSO
Model	275036-2110
Memory / EPROM	MICRO NEC 76F0038AGD - 6144 Kbit - C0000

Available tuning operations / options:

Spark advance correction for ECT sensor
Requested spark advance - high octane
Requested spark advance - low octane
Spark advance correction - valve timing position 1
Spark advance correction - valve timing position 2
Electronic throttle control
Electronic throttle control 2
Electronic throttle control 3
Lambda correction f(IAT)
Lambda correction f(ECT)
Lambda correction f(ECT) 2
Lambda correction f(ECT) 3
Gearbox maximum torque allowed
Advance limiter for component protection 1
Basic value setpoint Lambda sensor
Torque limiter
Lambda enrichment - open loop
RPM Limiter
Lambda driver wish
Speed limiter
% relative air filling limit depending on IAT
Driver torque request
Exhaust gas temperature sensor
Variable valve timing - inlet
Variable valve timing - outlet

Firmware identifiers (9)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	89663-33792-	1.51.012	33379200	DENSO 275036-2110
—	89663-33793-	1.51.008	33379300	DENSO 275036-2110
—	89663-33D11-	1.51.008	333D1100	DENSO 275036-2110
—	89663-33D10-	1.51.012	333D1000	DENSO 275036-2110
—	89663-30S21-	1.67.006	330S2100	DENSO 275922-3410
—	89663-30S31-	1.67.012	330S3100	DENSO 275922-3410
—	89663-30S22-	1.67.013	330S2200	DENSO 275922-3410
—	89663-30S32-	1.67.008	330S3200	DENSO 275922-3410
—	89663-30S42-	1.67.006	330S4200	DENSO 275922-3410

ECU notes

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other LEXUS

IS (XE30)
250 2.5L 24V V6 153kW/208HP DENSO IS (XE20)
F 5.0L V8 311kW/423HP DENSO IS (XE20)
200d 2.2L 16V 110kW/150HP DENSO IS (XE20)
220d 2.2L 16V 130kW/174HP DENSO GS (S190/S191)
GS 300 3.0 24V 182kW/244HP DENSO GS (S190/S191)
GS 350 3.5L 24V 227kW/305HP DENSO IS (XE20)
350 3.5L V6 228kW/306HP DENSO GS (S160)
GS 430 4.3L V8 224kW/300HP DENSO GS (L10)
GS 240 2.4L 16V 123kW/165HP DENSO LS (XF30)
LS 430 4.3L V8 216kW/290HP DENSO

→ All ECUs LEXUS