English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

LAMBRETTA G 350 22->24 20kW

ECU BOSCH MSE6.0 · 27 CV (2 kW) · 330 cc · Benzina aspirato

ECU Database › LAMBRETTA › LAMBRETTA G 350 22->24 20kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandLAMBRETTA
ModelG 350
Engine22->24 20kW
Stock power27 CV / 2 kW
Displacement330 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelMSE6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
—XH0204A379 1.88.010F01RB0D2E1 BOSCH MSE6.0
—XH0204A375 1.88.005F01RB0D2E1 BOSCH MSE6.0

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other LAMBRETTA

X 300
22-> 18.5kW X 250
24-> 17kW

→ All ECUs LAMBRETTA