KIA FORTE/K3/SHUMA 1.6L 16V 90kW/123HP M7.9.8

ECU BOSCH M7.9.8/MG7.9.8 · 123 CV (9 kW) · 1600 cc · Benzina aspirato

ECU DatabaseKIA › KIA FORTE/K3/SHUMA 1.6L 16V 90kW/123HP M7.9.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 5 firmware versions

Vehicle data

BrandKIA
ModelFORTE/K3/SHUMA
Engine1.6L 16V 90kW/123HP M7.9.8
Stock power123 CV / 9 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelM7.9.8/MG7.9.8
Memory / EPROMMICRO ST - 6656 Kbit

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Speed limiter
  • Air mass flow
  • Injection correction Lambda sensor 1

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
9001040004GTD_936CES2_5000 1.06.002 BOSCH M7.9.8/MG7.9.8
90010404751037370463 1.14.004 BOSCH M7.9.8/MG7.9.8
90030500031037370463 1.14.002 BOSCH M7.9.8/MG7.9.8
90309308061037370463 1.14.003 BOSCH M7.9.8/MG7.9.8
9030933702GAM_946CFS2_5000 1.14.004 BOSCH M7.9.8/MG7.9.8

ECU notes

Microprocessor ST10F275 ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata
Microprocessor ST10F275 To work on this ECU you can use NewTrasdata Warning! Lambda correction map, it is necessary to reduce the value to enrich the mixture.
Microprocessor ST10F275 To work on this ECU you can use NewTrasdata