English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

KIA CEE'D (JD) 1.6L 16V CRDI VGT 85kW/114HP EDC16C39

ECU BOSCH EDC16C39 · 116 CV (85 kW) · 1600 cc · Diesel sovralimentato

ECU Database › KIA › KIA CEE'D (JD) 1.6L 16V CRDI VGT 85kW/114HP EDC16C39

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 15 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandKIA
ModelCEE'D (JD)
Engine1.6L 16V CRDI VGT 85kW/114HP EDC16C39
Stock power116 CV / 85 kW
Displacement1600 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16C39
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • EGR valve control
  • EGR valve control 2
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Max injection limit - limp mode
  • Initialization values over pressure control valve
  • J
  • Torque limiter 2
  • Boost pressure deviation limits for basic charge air pressure
  • Boost pressure deviation limits for basic charge air pressure 2
  • Torque limiter
  • Torque limiter during particulate filter overloading - pressure
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Maximum indicated torque
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 3
  • Protection for fuel overheating
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Volumetric efficiency
  • Volumetric efficiency - correction
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Firmware identifiers (15)

Hardware No.Software No. (chip)VersionUpdate softwareECU
—1037390057 1.67.012P373C00I BOSCH EDC16C39
—1037390056 1.67.020P373C00I BOSCH EDC16C39
—1037510023 1.67.011P373C00I BOSCH EDC16C39
—1037510021 1.67.009P373C00I BOSCH EDC16C39
—1037501523 1.67.007P373C00I BOSCH EDC16C39
—1037391489 1.67.016P373C00I BOSCH EDC16C39
—1037393085 1.67.010P373C00I BOSCH EDC16C39
—1037514127 1.67.013P373C00I BOSCH EDC16C39
—1037390068 1.67.006P373C00I BOSCH EDC16C39
—1037379776 1.67.007P373701I BOSCH EDC16C39
—1037390039 1.67.021P373C00I BOSCH EDC16C39
—1037510024 1.67.008P373C00I BOSCH EDC16C39
—RBKRS00056 1.67.015P373C00I BOSCH EDC16C39
—1037384541 1.67.011P373B00I BOSCH EDC16C39
—1037384540 1.67.010P373B00I BOSCH EDC16C39

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. In cars with automatic gearbox the file read by serial system is not correct. In order to modify the car start from the original certified file of the setting file. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. In cars with automatic gearbox the file read by serial system is not correct. In order to modify the car start from the original certified file of the setting file. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata In cars with automatic gearbox the file read by serial system is not correct. In order to modify the car start from the original certified file of the setting file.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other KIA

SPORTAGE Mk1
2.0L 16V 94kW/126HP M4.6 KLARUS
2.0L 16V 98kW/131HP M2.1 SEPHIA
1.5L 8V 59kW/79HP 18 881A PRIDE
1.3L 8V 54kW/73HP 18 881A SHUMA
1.8L 8V 91kW/109HP M4.6 SORENTO Mk1
2.5L 8V CRDi 103kW/140HP EDC15C7 CARENS
2.0L 16V CRDI 82kW/111HP EDC15C7 SHUMA
1.5L 8V 59kW/79HP Siemens RIO/K2 (DC)
1.3L 8V 54kW/73HP SIRIUS32 SPECTRA
1.8L 16V 94kW/126HP ME7.9

→ All ECUs KIA