JEEP GRAND CHEROKEE (WK2) 5.7L V8 32V HEMI 257kW/347HP GPEC2

ECU CONTINENTAL-SIEMENS-VDO GPEC2 · 349 CV (257 kW) · 5700 cc · Benzina aspirato

ECU DatabaseJEEP › JEEP GRAND CHEROKEE (WK2) 5.7L V8 32V HEMI 257kW/347HP GPEC2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandJEEP
ModelGRAND CHEROKEE (WK2)
Engine5.7L V8 32V HEMI 257kW/347HP GPEC2
Stock power349 CV / 257 kW
Displacement5700 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelGPEC2
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Advance at part load
  • Spark advance correction for ECT sensor
  • Advance correction for IAT sensor
  • Exhaust gas temperature
  • Exhaust valves lift
  • Exhaust valves lift - catalyst heating
  • Exhaust valves lift - full load
  • Engine idle vs. ECT sensor
  • Engine idle
  • Gearbox maximum torque allowed
  • Intake valve lift
  • Intake valve lift - catalyst heating
  • Intake valve lift - full load
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter in Park position
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Driver torque request
  • Cooling fan activation
  • Volumetric efficiency
  • Volumetric efficiency - ECT correction
  • Volumetric efficiency - IAT correction

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
05150826AASIE14P09V22.1 ENGV22.1_TXXVXX.X 1.80.00468172069AQ CONTINENTAL-SIEMENS-VDO GPEC2
05150826AASIE14P09V21.0 ENGV21.0_TXXVXX.X 1.80.00468172033AP CONTINENTAL-SIEMENS-VDO GPEC2
05150997AAG2A16P13V01.1 ENGV01.1_TXXVXX.X 1.80.01268252280AE CONTINENTAL-SIEMENS-VDO GPEC2A

ECU notes

Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata