ECU Database ›
JEEP › JEEP COMPASS (MP/552) 1.3L 16V TURBO 132kW/177HP PHEV 4xe GPEC4LM
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 3 firmware versions
Vehicle data
| Brand | JEEP |
| Model | COMPASS (MP/552) |
| Engine | 1.3L 16V TURBO 132kW/177HP PHEV 4xe GPEC4LM |
| Stock power | 179 CV / 132 kW |
| Displacement | 1300 cc |
| Fuel | Benzina sovralimentato plugin hybrid - PHEV |
| Vehicle type | Auto |
ECU
| Manufacturer | CONTINENTAL-SIEMENS-VDO |
| Model | GPEC4LM |
| Memory / EPROM | MICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000 |
Available tuning operations / options:
- Torque supply enrichment - AT
- Minimum spark advance - correction
- Minimum spark advance - correction - ethanol
- Advance correction
- Advance correction - ethanol
- Boost pressure limiter
- Electronic throttle control
- Exhaust gas temperature
- Exhaust gas temperature - E100
- Engine idle vs. ECT sensor
- Engine idle vs. ECT sensor 2
- Gearbox maximum torque allowed
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint 2
- High pressure fuel pump setpoint - cold condition
- High pressure fuel pump setpoint - full load
- High fuel pressure pump limit for ECT sensor
- High-pressure fuel pump - in catalyst heating monitoring mode
- J
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Torque limiter - AT
- Torque limiter in full load
- Torque limiter - GPF protection
- Torque limiter in Eco mode
- Torque limiter in hybrid mode
- Lambda enrichment for cylinders protection
- Lambda enrichment for exhaust protection
- Torque limiter at flywheel
- RPM Limiter
- RPM Limiter 2
- Maximum permitted engine speed for manual gear selection
- RPM limiter in Park position
- RPM limiter - transmission protection
- Engine intake efficiency low limit
- Minimum limitation lambda sensor
- Engine intake efficiency high limit
- Engine intake efficiency high limit - ECO mode
- Driver torque request limiter
- Driver torque request limiter 2
- Knock detection factor
- Minimum torque monitoring - acceleration
- Max torque profile - AT
- Driver torque request
- Driver torque request 2
- Driver torque request launch control mode
- Cooling fan activation
- Torque limit table for IAT sensor
- Torque limit table for IAT sensor 2
- Torque limit table for EOT sensor
- Torque limitation - turbocharger protection
- Torque limit table for ECT sensor
- Torque model - air mass to torque per cylinder conversion
- Torque model - torque to air flow per cylinder conversion
- Volumetric efficiency - ECT correction
- Volumetric efficiency - IAT correction
Firmware identifiers (3)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 68415284AA | 4LM20P40V10.1_ENGV10.1_TXXVXX.X |
1.80.109 | 68493739AJ |
CONTINENTAL-SIEMENS-VDO GPEC4LM |
| 68415284AA | 4LM20P40V11.0_ENGV11.0_TXXVXX.X |
1.80.002 | 05149293AC |
CONTINENTAL-SIEMENS-VDO GPEC4LM |
| 68415284AA | 4LM20P40V10.1_ENGV10.1_TXXVXX.X |
1.80.002 | 68493738AJ |
CONTINENTAL-SIEMENS-VDO GPEC4LM |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Microprocessor BGA FREESCALE MPC5674F To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
