HYUNDAI ACCENT MK3 1.6L 16V CVVT 94kW/126HP M7.9.8

ECU BOSCH M7.9.8/MG7.9.8 · 128 CV (94 kW) · 1600 cc · Benzina aspirato

ECU DatabaseHYUNDAI › HYUNDAI ACCENT MK3 1.6L 16V CVVT 94kW/126HP M7.9.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 2 firmware versions

Vehicle data

BrandHYUNDAI
ModelACCENT MK3
Engine1.6L 16V CVVT 94kW/126HP M7.9.8
Stock power128 CV / 94 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelM7.9.8/MG7.9.8
Memory / EPROMMICRO ST - 6656 Kbit

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Speed limiter
  • Air mass flow
  • Injection correction Lambda sensor 1

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
9030930952GMC_7G6CES1_5000 1.14.001 BOSCH M7.9.8/MG7.9.8
9030930959GMC_7R6CFS1_5000 1.14.002 BOSCH M7.9.8/MG7.9.8

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Microprocessor ST10F275 ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop