FORD GALAXY 1.9L 8V TDI 95kW/127HP EDC15 P/P+

ECU BOSCH EDC15P+ · 129 CV (95 kW) · 1900 cc · Diesel sovralimentato

ECU DatabaseFORD › FORD GALAXY 1.9L 8V TDI 95kW/127HP EDC15 P/P+

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Vehicle data

BrandFORD
ModelGALAXY
Engine1.9L 8V TDI 95kW/127HP EDC15 P/P+
Stock power129 CV / 95 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15P+
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Air mass flow
  • Overboost timing

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810111981037366958 1.40.007038906019LD 1595 BOSCH EDC15P+
02810111981037369959 1.40.001038906019LD 5801 BOSCH EDC15P+
02810111991037366689 1.40.002038906019BH 1591 BOSCH EDC15P+
02810118211037371264 1.13.003038906019NB 6249 BOSCH EDC15P+

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. The ECU is located in the engine compartment behind the battery.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.